The Ideal Elise
Heat Only Wall Hung Boilers
PO Box 103, National Avenue, Hull HU5 4JN Tel: 0870 849 8056 Fax: 0870 849 8058 www.idealboilers.com
EL /5k /11/07
PERFORMANCE DATA
Model
elise H15
elise H24
Output
kW
8.8 - 14.6
8.8 - 23.4
Btu/h
30,000 - 49,800
30,000 - 80,000
SEDBUK rating
A
A
NOX Class
5
5
INSTALLATION DATA
Gas supply connection
inches
Rc
1
/
2
(
1
/
2
" BSP female)
CH flow connection
mm
22 compression*
CH return connection
mm
22 compression*
Condensate drain
mm
21.5
Electrical supply
V/Hz
230 / 50
Power consumption
W
38
Fuse rating
A
3
Water content
litres
1.7
Maximum lift weight
kg
32
Total packed weight
kg
35
Flue terminal diameter
mm
100
S trap depth
mm
52
*For outputs exceeding 18kW (60,000 Btu/h), 28 mm primary pipework will be required.
CLEARANCE DATA
The following clearances are required for installation, servicing and replacement of parts.
Front of boiler
Sides of boiler
Top of boiler
Bottom of boiler
450 mm
5 mm
165 mm**
100 mm
Minimum clearance required at bottom of boiler for servicing is 100 mm, additional clearance will be
required for installation, depending upon site conditions.
**More clearance required when fitting fluing to the side.
PIPEWORK CONNECTIONS AND PRODUCT DIMENSIONS
Flue pluming is a by-product of efficiency. Please be aware of terminal positions to avoid complaints.
For full technical details please refer to the Installation and Servicing Instructions provided with the product.
Fascia can be removed for cupboard installations. Width: 390mm, depth: 278mm. *Add 32 mm with stand off brackets fitted
SEDBUK rating
A
What makes the
Ideal Elise H the
perfect Heat-only
boiler for Installers?
Simple to Site
·
Choice of 2 models
·
Standard Kitchen cupboard fit
·
No compartment ventilation
required
·
Reduced terminal clearances
Ease of Installation
·
Standard telescopic flue kit
Boiler Frost Protection
·
Fully modulating operation
·
Wide range of flue options
·
Central flue position
Quality and Confidence
·
Proven cast aluminium-silicon
heat exchanger
Option Kits Available
·
Stand off kit
·
Siphon kit
·
Remote User Control kit
·
Condensate Pump kit
Serviceability
- With simple installation, reliable
components and self diagnostic technology, this high
performance heat-only boiler will enable the installer
to save time and satisfy customers.
Options
- Ideal has also provided a range of option
kits to aid installation.
Perfect for installers
The Elise H range of boilers are
automatically controlled, wall-mounted,
fan-assisted, condensing gas boilers. It has
full modulating central heating outputs of:
H15 8.8kw -
(30,000 Btu/h) to 14.6kW (50,000 Btu/h)
H24 8.8kw -
(30,000 Btu/h) to 23.4kW (80,000 Btu/h)
Satisfaction
- Everything about the Ideal Elise H
has been designed to satisfy needs of installers and
aen users.This is because a happy customer is a
repeat customer. That means more business for you,
the installer, from service and recommendations.
Practical design
- Casing aesthetics
provide a fresh look to the boilers. Quality benefits
have been implemented through introduction of the
telescopic flue and the latest control boards. In
addition there is in-built frost protection and the
Elise H also fits in a standard
kitchen cupboard.
Economy
- Designed
specifically for the independent
installer, the Ideal Elise H offers
upfront pricing that's right for
you and your customers.
And naturally the Ideal Elise is
Sedbuk A rated, with full
modulation to match heat loads.
Reliability
- Unsurprisingly,
every installer we listened to
considered reliability to be at the
top of their wish list, which is
why every component in the
Elise H, such as the proven cast
aluminium-silicon heat
exchanger and the latest control
boards, has been calculated to
provide consistent, dependable
and durable performance.
The Ideal Elise H
Features and Benefits
Classic styling
Suits more installations
SEDBUK A efficiency
SAP design flexibility
Lower running costs
Fully modulating operation
Automatically matches system loads for
high efficiency and low running costs
Compact size
Standard Kitchen Cupboard fit
No compartment ventilation required
No unsightly grilles
Widest range of flue options
Easier siting
Telescopic flue standard
Faster installation
Central flue position
Easier installation
Status & diagnostics display
User friendly & Faster fault-finding
Cast aluminium-silicon heat-exchanger
Robust high-efficiency technology
Boiler frost protection inbuilt
Reassurance
Remote User control kit option
More installation flexibility
Condensate pump option
Easier boiler siting
THE FEATURES
THE BENEFITS
Elise H- technical data
Cast aluminium-silicon
alloy heat exchanger
ensures tough, depend-
able construction
and performance.
Built-in condensate
`S' trap with simple con-
nection makes installation
easier.
Fully modulating product
with outputs up to 24 kW
(80,000 Btu/h) ensuring
maximum efficiency,
suitable for a wide range of
heating requirements.
Alpha-numeric diagnos-
tic readout gives essen-
tial, easy-to-read opera-
tion indicators and
shows boiler status
together with fault
codes, in the unlikely
event of a problem.
Low lift weight
of 32 kg offers easy
installation.
Compact dimensions
of height 582 mm,
width 390mm and depth
290 mm and
no compartment ventilation
required, ensure kitchen
cupboard fit and provide
siting flexibility.
`Self-adjusting' feature
reduces time and
cost of installation, and
makes installation much
simpler.
Hinged control PCB box with
easy access to connections
for simplified servicing
and installation.
Easy-to-wire mains electrical
connection makes installation
easier.
`Downward firing'
pre-mix burner
for greater reliability,
ensuring lower Nitrogen
Oxide emissions (envi-
ronmentally friendly).
Optional remotely mount-
able user controls
improve siting flexibility.
Includes wall mounting
plate, blank housing
(including PCB, fixing
screws and instruc-
tions).
Siting flexibility
The Ideal Elise H offers a substantial number of fluing
options, giving excellent siting flexibility for almost all
applications.
The Standard B pack flue is telescopic for easy installation
and the range of options available includes components
which ensure that you, the installer, encounter minimum
restrictions. Systems are available as 60mm/100mm
concentric as well as a choice of 80mm or 60mm
twin-pipe. The high level flue outlet kits provide the
answer to pluming issues.
Fluing Options
Maximum flue lengths
Horizontal
All models
6 metres
Vertical
All models
7.5 metres
Powered Vertical
22 metres
All models
90° elbow resistance
1 metres
45° elbow resistance
0.6 metres
Maximum Combined flue
and air lengths
80mm System
All models 60.0 metres
90° elbow resistance 2.0 metres
45° elbow resistance 1.0 metres
60mm System
All models 18.0 metres
90° elbow resistance 1.4 metres
45° elbow resistance 1.25 metres
Optional Accessories
Easy Identification Guide
Stand-off kits
Comprising stand-off channel
and fixings.
Ideal Part No. 156111.
Syphon kit
Includes syphon for condensate.
Ideal Part No. 201560
Condensate pump kit
Condensate Pump Kit.
Ideal Part No. 159991.
Remote user control kit
Includes wall mounting plate,
blank housing including PCB,
fixing screws.
Ideal Part No. 200719.
CONCENTRIC FLUE RANGE 60 /100MM (HORIZONTAL & VERTICAL)
HIGH LEVEL FLUE OUTLET RANGE
TWIN PIPE FLUE OPTIONS - 80MM & 60MM
Horizontal flue ter-
minal 60 dia (twin
pipe)
Ideal Part No.
203150
Horizontal air termi-
nal 80 dia
(twin pipe)
Ideal Part No.
203151
Horizontal air termi-
nal 60 dia
(twin pipe)
Ideal Part No.
203152
Loft terminal air
grille (twin pipe)
Ideal Part No.
158403
Flue ridge tile
terminal 80 dia
Ideal Part No.
158415
Pitched roof
terminal
(twin pipe)
Ideal Part No.
201891
Flue slip coupling
60 dia
Ideal Part No.
203154
Flue slip coupling
80 dia
Ideal Part No.
203155
Flue extension
0.5m x 60 dia
Ideal Part No.
203156
Flue extension
0.5m x 80 dia
Ideal Part No.
203157
Flue extension
2m x 60 dia
Ideal Part No.
203158
Flue extension
2m x 80 dia
Ideal Part No.
203159
Flue extension
3m x 60 dia
Ideal Part No.
203160
Flue extension
4m x 60 dia
Ideal Part No.
203162
Flue extension
3m x 80 dia
Ideal Part No.
203161
Flue extension
4m x 80 dia
Ideal Part No.
203163
Flue terminal -
horizontal
twin pipe 60/100
Ideal Part No.
203133
Weather collar
(universal)
125mm
Ideal Part No.
158520
Weather collar
(flat roof)
125mm
Ideal Part No.
158521
Flue elbow 90º
80 dia
(twin pipe only)
Ideal Part No.
203138
Ideal Part No.
203145
Ideal Part No.
203147
Ideal Part No.
203148
Ideal Part No.
203149
Ideal Part No.
203139
Ideal Part No.
203140
Ideal Part No.
203141
Ideal Part No.
203142
Ideal Part No.
203143
Ideal Part No.
203144
Flue vertical ter-
minal twin pipe
125 dia
Flue connector
twin pipe 80 dia
Flue connector
twin pipe 60 dia
Horizontal flue
terminal 80 dia
(twin pipe)
Flue elbow 90º
60 dia
(twin pipe only)
Flue elbow 45º
pair 80 dia
(twin pipe only)
Flue extension
pipe 1m x 80
dia (pair)
Flue extension
pipe 1m x 60 dia
(pair)
Flue horizontal
terminal twin
pipe 125 dia
Flue elbow 45º
pair 60 dia
(twin pipe only)
Flue vertical
connector
Ideal Part No.
203135
Flue powered
vertical kit
Ideal Part No.
203136
Flue deflector
60 dia
Ideal Part No.
203137
Weather collar
(universal)
100mm
Ideal Part No.
152258
Weather collar
(flat roof) 100mm
Ideal Part No.
152259
Flue finishing kit
Ideal Part No.
155988
Ideal Part No.
203134
Ideal Part No.
203164
Ideal Part No.
203128
Ideal Part No.
203129
Ideal Part No.
203130
Ideal Part No.
203131
Ideal Part No.
203132
Flue powered
vertical terminal
100 dia
Telescopic B
pack flue
Horizontal flue
terminal
(600 long)
Flue Elbow 90º
kit (60/100)
packaged
Flue Elbow 45º
kit (60/100)
packaged (pair)
Flue roof kit
packaged
Ideal Part No.
203146
Ideal Part No.
203228
Ideal Part No.
203229
Ideal Part No.
203230
Flue high level
outlet kit
High level flue
45º elbow (pair)
High level flue
90º elbow
A
B
E
Flue Extension
1m.
(Pack D)
High level flue
extension kit (1m)